Table of Contents
Advertisement
8. PREPARATORY OPERATION
Set the current day and time
1
Press the TIMER button for 3 seconds
or more.
The timer display will flash.
2
Press the button "+" or "-" to set the date. The selected date
will flash.
3
The date setting is finished and the
time setting is prepared after pressing
TIMER button or without pressing within
10 seconds.
4
Press the button "+" or "-" to set the current
time.
Press repeatedly to adjust the current time
in 1-minute increments.
Press and hold to adjust the current time
continuous.
5
The setting is done after pressing TIMER
button or without pressing button in
10 seconds.
WIRED CONTROLLER OF AIR CONDITIONER
ex. Monday AM 11:20
9. OPERATION
Remote signal receiving function
The wired remote controller can be a remote signal receiving
device, you can use the wireless remote controller to control the air-
conditioner through the wired remote controller when the system
have been powered on.
To start/stop operation
Press the POWER button.
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
To set the operation mode
•
Operation mode setting
Press the MODE button to set the operation mode.
(Heat function is invalid for cool only type unit)
•
Room temperature setting
Lower
Raise
Press the button "+" or "-" to set the room temperature.
Indoor Setting Temperature Range:
17~30°C (62~86°F/62~88°F (Depending on models)).
•
Fan speed setting
Press the FAN SPEED button to set the fan speed.
(This button is unavailable when in the mode of Auto or Dry)
PREPARATORY OPERATION | 7
6720872735 (2019/08)
Advertisement
Table of Contents
