Epson PowerLite 7850p Product Information Manual page 21

EPSON PowerLite 7850p Projector
The following tables explain the status, video source, and error
icons.
Status icons
(green) Projecting; no problems
(dark) Turned off; no problems
(green) Projecting; problems detected
(dark) Turned off; problems detected
Network error (for example, not connected to
network or power cable disconnected).
You may also see this error if
is selected in
Video source icons
Computer
BNC
S-Video
Video
DVI
Error icons
Lamp replacement notification (the lamp is
nearing the end of its life; see page 22)
High-speed cooling in progress (the
projector is getting too hot but continues to
operate)
Overheating (projection turned off
automatically)
Lamp out or lamp cover open
Fan error
Sensor error
Internal problem
20 EPSON PowerLite 7850p Projector
-
Network OFF
Standby Mode
.
Controlling Your Projectors
The control buttons in the upper-right of the EMP Monitor
screen let you turn the projectors on and off and select video
sources. (Hold the mouse pointer over a button to see a
description of its meaning.) Make sure you've selected the
projector(s) you want to operate before clicking one of the
buttons.
Note: To turn on a projector when it's in standby mode (plugged in
but not projecting), first select
setting in the projector's Advanced1 menu.
Mode
Configuring the Monitoring Interval
If you need to have the most current status information about
your projectors, click the
Monitor screen.
You can also select how often EMP Monitor checks the
projector status:
1. From the Tool menu, select
screen.
Note: If you want EMP Monitor to run whenever you start
your computer, click
2. Select the desired update interval and click
6/03
Control buttons
as the
Network ON Standby
button on the EMP
Refresh
. You see this
Configuration
.
Add to Startup
.
OK