Adjusting The Volume; Adjusting The Brightness; Adjusting The Color Mode; Correcting Computer Images - Epson PowerLite 77c User Manual

Epson PowerLite S5 Series / 77c Projector
❏ If your image looks like
keystone correction value. Press the
on the projector to correct the shape of the image. After
correction, your image will be slightly smaller.
PowerLite S5 Series
PowerLite 77c
❏ On the PowerLite 77c, you may need to turn on Auto
Keystone in the Settings menu. See your User's Guide for
instructions.
You can also make keystone adjustments using the projector's
Settings menu, as described in the User's Guide.

Adjusting the Brightness

The brightness of an image depends on the source you are
projecting and the amount of light in the room. If the image is
too bright or not bright enough, here are two ways you can
adjust it:
❏ Change the
Brightness
❏ Select
or for the
Low High
the Settings menu. Low brightness mode extends the life of
the lamp and decreases the fan noise.

Correcting Computer Images

If you've connected a computer and the image doesn't look
right, or it doesn't fit properly on the screen, press the
button on the projector or the
remote control. This automatically resets the projector's
tracking, sync, resolution, and position settings. You must be
projecting a computer image for this button to have any effect.
Additionally, if the
Auto Setup
to , the Auto function will not work.
OFF
8 Epson PowerLite S5 Series / 77c Projector
-
or , you need to adjust the
or buttons
setting in the Image menu.
option in
Brightness Control
Enter
button on the
Enter/Auto
option in the Signal menu is set

Adjusting the Volume

You can use the
Vol–
to increase or decrease the volume for the projector's built-in
speaker.
Note:
You can also adjust the volume using the projector's Settings menu.
See your User's Guide for details.
On the PowerLite 77c, you can also use the buttons on the
projector to control the volume. Press the
increase the volume, or the
gauge appears on the screen while the volume is being adjusted.
Note:
You must adjust the volume separately for each input source.

Adjusting the Color Mode

You may want to adjust the
color mode to select a different
setting that is appropriate for
the image you're projecting
and the environment in which
you're projecting it. Press the
button on the
Color Mode
remote control.
If you're projecting computer or RGB video images, the default
color mode is
Presentation
presentations in bright rooms.
5/07
and + buttons on the remote control
Vol
button to
button to decrease it. A volume
PowerLite 77c only
, which is appropriate for full-color