Additional Resources - Dell EMC VxFlex Ready Node 14G Manual

Additional resources

VxFlex OS resources
Dell Lifecycle Controller (LC)
Firmware updates may also display and log the following message:
This update is not compatible with your system configuration.
These firmware are included on the ISO in order to support various VxFlex Ready
Node platforms. The log messages do not necessarily indicate a failure.
This section contains information regarding additional resources that may be helpful
useful when using the Hardware ISO.
VxFlex Ready Node deployments have specific guidelines regarding server installation,
rack and stack procedures, and power and networking requirements.
The VxFlex Ready Node Hardware Installation Guide describes how to install the physical
components of a VxFlex Ready Node system. For additional information regarding the
VxFlex Ready Node product, documentation, advisories, downloads, and white papers,
visit https://support.emc.com/products/42216.
With the launch of the Dell PowerEdge 13th-generation servers in September 2014,
Dell enhanced embedded management without the need to install a software-based
Reference material
Additional resources
75