Dell EMC VxFlex Ready Node 14G Manual page 57

Output similar to the following is displayed:
3. Verify that all the devices have a virtual device created on them.
In the Drive Information output, the device state displayed as "Onln" in the
State column shows that the device has a virtual device created on it.
4. Display device group (DG) and virtual device (VD) information:
/opt/MegaRAID/perccli/perccli64 /c0/vall show
Output similar to the following is displayed:
5. Verify that all the VDs are configured correctly.
The following values should appear in the display:
Cache = NRWTD (for SSDs)
l
Cache = RWBD (for HDDs)
l
After you finish
Continue by retrieving the device path on the server.
Ensure virtual disk creation with PERCCLI
Preparing Disks
57