Selecting The Image Source; Adjusting The Height Of Your Image; Focusing And Zooming Your Image; Adjusting The Image - Epson PowerLite 61p Product Information

If the option isn't available, try selecting one of the
Arrange
Simulscan resolution settings. Click the
necessary, and then select a
seconds for the projector to sync up after making the selection.)

Selecting the Image Source

If multiple devices are connected to the projector, the easiest
way to select the image source is to press the
button on either the projector or remote control until the
correct image is projected.
You can also press one of the following buttons on the
remote control:
to select the device connected to the projector's
Comp 1
Computer 1/Component Video 1
button to to select the device connected to the
Comp 2
Computer 2/Component Video 2
to select the deviced connected to the
S-Video
port.
S-Video
button to select the device connected to the
Video
port.
Video
After you select a source, the screen goes dark for a moment
before the image appears. The name of the selected source (such
as or
Computer1 S-Video

Adjusting the Image

Once you see your image, you may need to make certain
adjustments, as described in this section.

Focusing and Zooming Your Image

Rotate the focus ring to sharpen the image.
icon, if
Monitor
resolution. (Allow a few
Simulscan
Source Search
port.
port.
) appears briefly on the screen.
Focus ring
Epson PowerLite 61p/81p Projector
Rotate the zoom ring to reduce or enlarge the image.
You can also change the image size by moving the projector
closer to or farther away from the screen. You can use the
buttons on the remote control to zoom in on a portion
E-Zoom
of the image. See "Zooming Your Image" on page 7 for
instructions.

Adjusting the Height of Your Image

If the image is too low, you can raise it by extending the
projector's front adjustable foot.
1. Stand behind the projector. Press up on the blue foot release
lever and lift the front of the projector to extend the front
adjustable foot.
2. Once the image is positioned where you want it, release the
lever to lock the foot in position.
3. To fine-tune the height of the image,
rotate the feet at the back of the
projector.
If the image is no longer rectangular after
raising it, see the next section.
6/04 Epson PowerLite 61p/81p Projector
Zoom ring
5
-