To enter the service mode
· FLICKER ADJ
To enter the flicker adjustment mode
· H PLL
When non-standard signal of VIDEO/S-VIDEO is inputted (VCR, VHD, etc.), horizontal synchronization might be disordered
according to connected equipment. In this case, set H PLL to OFF.
2.3.
Canceling EXT OPTION
Press "MENU" button on the remote control unit.
3 Self-Check Mode
This mode is used to narrow down the location of the failure.
3.1.
Procedure to enter the self-check mode
Select "SELF CHECK" on "EXT OPTION" menu and press "ENTER" button on the remote control unit.
All manuals and user guides at all-guides.com
7
PT-P1SDU / PT-P1SDE / PT-P1SDEA