Epson PowerLite 500c User Manual Supplement page 98

4. Press the bottom edge of the
repeatedly to select one of the following options:
P-in-P
Changes from a composite (standard) video source to
an S-video source for the picture-in-picture display.
No-Signal Msg
Selects the screen color and message to display when
the projector is not receiving a signal. The logo setting
displays an image that you have transferred to the
projector. See page 56 for instructions on transferring
an image to use as the no-signal message.
Prompt
Turns off the identifying text that appears briefly when
you switch from computer input to a video source.
A/V Mute
Selects the screen color or image to display when you
press the
AV/Mute
image that you have transferred to the projector. See
page 56 for instructions on transferring an image to use
for the A/V Mute display.
Power Mgmt Sys
Turns on the power management system, which takes
effect when your laptop goes into sleep mode.
5. Press the right side of the
the settings available for each option.
6. When you're finished, press
button (or tilt it down)
Enter
button. The logo setting displays an
button to move through
Enter
.
Esc
Fine-Tuning Your Projector
55