Epson PowerLite 500c User Manual Supplement page 117

Do not overload wall outlets, extension cords, or integral
convenience receptacles. This can cause fire or electric
shock.
Do not place the projector where the cord can be walked
on. This may result in fraying or damage to the plug.
Unplug the projector from the wall outlet before cleaning.
Use a damp cloth for cleaning. Do not use liquid or aerosol
cleaners.
Do not block the slots and openings in the projector case.
They provide ventilation and prevent the projector from
overheating. Do not operate the projector on a sofa, rug, or
other soft surface, or in a closed-in cabinet unless proper
ventilation is provided.
Never push objects of any kind through cabinet slots.
Never spill liquid of any kind into the projector.
Except as specifically explained in this User's Guide, do not
attempt to service this product yourself. Refer all servicing
to qualified service personnel. Opening or removing covers
may expose you to dangerous voltages and other hazards.
Unplug the projector during lightning storms or when it
will not be used for extended periods.
Do not place the projector and remote control on top of
heat-producing equipment or in a hot location.
Unplug the projector from the wall outlet and refer
servicing to qualified service personnel under the following
conditions: When the power cord or plug is damaged or
frayed. If liquid has been spilled into the projector, or if it
has been exposed to rain or water. If it does not operate
normally when you follow the operating instructions, or if
it exhibits a distinct change in performance, indicating a
need for service. If it has been dropped or the housing has
been damaged.
If you use the projector in a country other than where you
purchased it, use the correct power cable for that country.
Notices
74