JVC TH-M45 Service Manual page 9

3.1.2 Removing the front panel assembly
(See Figs.5 and 6)
• Remove the metal cover.
(1) From the top side of the main body, disconnect the parallel
wires from the connectors (CN408, CN409) on the main
board. (See Fig.5.)
(2) Disconnect the card wires from the connectors (CN407,
CN412) on the main board. (See Fig.5.)
(3) Remove the screw C attaching the earth wire to the main
board. (See Fig.5.)
(4) From the bottom side of the main body, remove the three
screws D attaching the front panel assembly. (See Fig.6.)
(5) Release the two hooks b and hook c from the both and bot-
tom sides of the main body, and remove the front panel as-
sembly in the direction of the arrow. (See Figs.5 and 6.)
All manuals and user guides at all-guides.com
Main board
Hook b
CN408
Front panel assembly
Fig.5
Fig.6
Card wire
Card wire
CN407
CN412
C
Earth
wire
CN409
Hook b
Parallel wires
Hook c
D
Front panel
assembly
(No.MB033)1-9