Controlling A Networked Projector Using Crestron Roomview - Epson PowerLite 1850W User Manual
Epson powerlite 1850w: user guide
Hide thumbs
Also See for PowerLite 1850W:
- Quick setup (4 pages) ,
- User manual (188 pages) ,
- Specification (6 pages)
Table of Contents
Advertisement
4. Select the Others menu and press Enter.
5. Set the RoomView setting to On to allow the projector to be detected.
6. When you finish selecting settings, select Complete and follow the on-screen instructions to save
your settings and exit the menus.
7. Turn off the projector, then turn it on again to enable the setting.
Parent topic:
Controlling a Networked Projector Using Crestron RoomView
Once you have set up your projector to use Crestron RoomView, you can control and monitor projection
using a compatible web browser.
1. Start your web browser on a computer connected to the network.
2. Type the projector's IP address into the browser's address box and press the computer's Enter key.
You see this screen:
3. Select the input source that you want to control in the Sources List box. You can scroll through
available sources using the up and down arrows in the box.
Crestron RoomView Support
49
Advertisement
Table of Contents
