Registering A Projector - Epson PowerLite 1810p User Manual

PowerLite 1810p/1815p
If you've added the program to the Startup programs folder,
then it may already be open. If so, click the icon in the system
tray on the lower-right corner of your screen to display the EMP
Monitor window:
To close EMP Monitor, select
click the program icon shown above, then select
Note: If you want to monitor projectors while they are in standby
mode, select in the Extended menu, then select
Standby Mode
.
Network On

Registering a Projector

Before you can monitor a projector, you have to register it.
Follow these steps to automatically search for your projector(s).
1. Open EMP Monitor as described above. You see this screen:
20 PowerLite 1810p/1815p
-
Click here to start EMP Monitor
from the File menu or right-
Exit
Exit.
2. Select
Edit > New > Projector (automatic search)
this screen:
3. Click to locate projectors currently operating on the
Search
network. Any projectors found on the network are listed as
shown below:
3/08
. You see