Using The Remote Control; Adjust The Image; Where To Get Help - Epson MovieMate 60 Quick Setup

4
Press the power button on the projector or remote control.
Power light
and button
The projector beeps, the power light flashes green, and the projector
warms up. When the power light stays green, the projector is ready
to use.
NOTE: To shut down the projector, press the
confirmation beeps, then unplug it. You don't have to wait for the projector to
cool down.

Adjust the image

1
If you don't see an image, press the Source button (remote control) or
Source Search button (projector) to select the image source.
NOTE: If you still see a blank screen or have other display problems, see
the on-screen User's Guide.
2
To raise the image, press the foot adjustment levers and lift the front of
the projector. Release the levers to lock the feet in position. If the image
is horizontally tilted, you can turn the feet to level it.
3
To reduce or enlarge the image, press the Visual Setup button, select
Signal, and press Enter. Press the up or down arrow buttons until you
see the Zoom menu, then press the left or right arrow buttons to change
the image size.
4
Turn the focus ring to sharpen the image.
5
If your image looks like or
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely.
6
If your image looks like or
buttons on the remote control to correct it.
power button, wait for the two
, you've placed the projector off to
, press the or Keystone

Using the remote control

Make sure the batteries are installed as shown (two AA batteries included).
Turn projector
on and off
Project from
external equipment
Fix image shape
(if the projector
is tilted)
For more information on using the remote control, see your on-screen
User's Guide.

Where to get help

Manual
For more information about using the projector, install the User's Guide from
your projector CD.
Telephone Support Services
To use the Epson PrivateLine ® Support service, call (800) 637-7661 and enter
the PIN on the Epson PrivateLine Support card included with your projector.
This service is available 6 to 6
AM PM
the duration of your warranty period. You may also speak with a projector
support specialist by dialing:
(562) 276-4394 (U.S.) or (905) 709-3839 (Canada), 6
Monday through Friday
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.
Internet Support
Visit epson.com/support for solutions to common problems. You can
download utilities and documentation, get FAQs and troubleshooting advice,
or e-mail Epson with your questions.
Registration
Register today to get product updates, special promotions, and customer-only
offers. You can use the CD included with your projector or register online at
www.epson.com/webreg.
Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. Epson MovieMate and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2009 Epson America, Inc. 8/09
Printed in XXXXXX
Function/numerics
toggle switch
Eject DVD
Adjust picture for
different lighting
Pause movie and
turn on light
Control playback
Control volume
Access DVD features
, Pacific Time, Monday through Friday, for
to 6 , Pacific Time,
AM PM
CPD-27684