Table of Contents
Advertisement
No.
5
6
7
Synchronous
Motor
8
Clutch Tip
3.5~4.5
20
THE REPAIR METHOD
Process
Assemble the fastening nut
Assemble the Belt
Assemble the protector
keep distance
2~3mm
Final checking
Drain
Valve
Assemble 2
Notice
- Use fixing jig and 17mm
socket wrench as if
disassembling, as fastening
torque about 100~200kgf-cm.
- Check the end-play, up and
downward and check the
binding force, too much or
not on bi-direct of rotation.
Finally, check the distance
between brake lever and
control bolt(2~3mm).
Also, check the interferance
depth both clutch tip and clutch
boss(3.5~4.5mm).
Advertisement
Table of Contents
