Panasonic HC-WXF995 Operating Instructions Manual page 96

[WIDE CONV. LENS SET]
This will change the setting of the Image Stabilizer function and Maximum zoom ratio to the one
appropriate for the recording when a Wide Conversion Lens (optional) is attached to this unit.
: [RECORD SETUP] # [WIDE CONV. LENS SET] # [ON]
MENU
≥ The following functions will not work:
j Video light
j [AF ASSIST LAMP]
j Night Mode ([Infrared])
≥ In Motion Picture Recording Mode, [ZOOM MODE]
10k). In Still Picture Recording Mode, a zoom magnification of up to 10k is possible.
[Wind Noise Canceller]
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥ Switch to Manual Mode.
: [RECORD SETUP] # [Wind Noise Canceller] # desired setting
MENU
[Strong]:
[Normal]:
[OFF]:
≥ When [Strong] is set, you can check how effectively the wind noise is reduced with the icon
displayed on the screen. In descending order of the strength of the reduction effect,
/ is displayed.
≥ When [Normal] is set,
≥ This function's default setting is [Normal].
≥ When switching to Intelligent Auto Mode or Intelligent Auto Plus Mode, [Wind Noise Canceller] is
set to [Strong], and the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
≥ This function cannot be set when using an external microphone.
[LOWCUT]
This function reduces the low-pitched sound when using an external microphone.
≥ Switch to Manual Mode.
: [RECORD SETUP] # [LOWCUT] # [ON]
MENU
≥ This function can be set only when using an external microphone.
(l 73)
When a strong wind is detected, this option effectively reduces the
wind noise by minimising the low-pitched sound.
This option extracts and reduces only the wind noise without
deteriorating the sound quality.
Cancel the setting.
will be displayed on the screen.
(l 73)
- 96 -
(l 90) is fixed to [Opt.Zoom 10k] (up to
/ /