Preparations Before Using [Remote Ctrl] - Panasonic HC-WXF995 Operating Instructions Manual

Preparations before using [Remote Ctrl]

Install the smartphone application "Image App" on your smartphone. (
Setting up a direct Wi-Fi connection between this unit and a
smartphone
Operate this unit and the smartphone to set up a direct connection.
Check the [Direct Connection Password] setting in [Wi-Fi Setup]. (
≥ The default setting for [Direct Connection Password] is [OFF].
Select [ON] as needed, for example when the setting seems necessary for your Wi-Fi
environment.
≥ When [Direct Connection Password] is set to [OFF]
j Proceed to "When [Direct Connection Password] is set to [OFF]" in "Using [Remote Ctrl] with a
direct connection".
≥ When [Direct Connection Password] is set to [ON]
j [Easy Connection (WPS)]
j Connecting with QR code
j Connecting by entering an SSID and Password
When the Wi-Fi connection is complete, proceed to "When [Direct Connection Password] is set to
[ON]" in "Using [Remote Ctrl] with a direct connection".
Setting up a Wi-Fi connection via a wireless access point
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Set up a Wi-Fi connection between this unit and the wireless access point.
≥ [Easy Connection (WPS)]
≥ Searching for wireless access points to set up a connection
≥ Setting up a connection manually
3 When the Wi-Fi connection is complete, follow the procedure in "Using
[Remote Ctrl] with a wireless access point connection". (
≥ Using [Wi-Fi Setup Wizard], you can also set up a Wi-Fi connection in conjunction with the
smartphone application "Image App".
(l 167)
(l 197)
(l 198)
(l 194)
(l 196)
(l 193)
(l 199)
(l 168)
(l 195)
- 166 -
191)
l
203)
l
168)
l