Table of Contents
Advertisement
1. Touch the Inicio/Pausa
pause the appliance. The related
indicator flashes.
2. Touch the Inicio Diferido button
repeatedly until the display shows the
desired delay time.
3. Touch the Inicio/Pausa
again to start the new countdown.
9.8 The SensiCare System load
detection
After touching the Inicio/Pausa
button:
1. The SensiCare System starts
estimating the weight of the load to
calculate the real programme
duration. During this phase the two
dots separating hours from minutes
are blinking
2. After about 15-20 minutes new cycle
duration is displayed.
The appliance automatically adjusts
the programme duration to the load
to achieve perfect washing results in
the minimum possible time.
9.9 Interrupting a programme
and changing the options
When the programme is running, you
can change only some options:
1. Touch the button Inicio/Pausa
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Inicio/Pausa
again.
The washing programme continues.
9.10 Cancelling a running
programme
1. Press the button On/Off to cancel the
programme and to deactivate the
appliance.
2. Press the button On/Off again to
activate the appliance.
button to
button
There is also an alternative way of
cancelling:
1. Rotate the selector knob to the "Reset"
position
2. Wait for 1 second. The display shows
.
Now, you can set a new washing
programme.
9.11 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active). The display shows
The indicator of the Inicio/Pausa
button goes off.
The lid unlocks and the indicator
goes off.
1. Press button On/Off to deactivate the
appliance.
After five minutes from the end of the
.
programme, the energy saving function
automatically deactivates the appliance.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the lid and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
If the SensiCare System has
completed and the water
filling has already started,
the new programme starts
without repeating the
SensiCare System. The
water and the detergent are
not drained out in order to
avoid waste.
.
When you activate the
appliance again, the display
shows the end of the
previous programme. Turn
the programme dial to set a
new cycle.
ENGLISH
17
Advertisement
Table of Contents
