Table of Contents
Advertisement
16
www.electrolux.com
3.
•
Position A for powder detergent (factory setting).
•
Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
9.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme.
The indicator of the Inicio/Pausa button
flashes.
The display shows an indicative
programme duration.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons.
If a selection is not possible
an acoustic signal sounds.
9.6 Starting a programme
Touch the Inicio/Pausa
the programme. It is not possible to start
the programme when the indicator of the
button is off and doesn't flash (e.g.
programme dial on a wrong position).
The related indicator stops flashing and
stays on.
The programme starts, the lid is locked.
The display shows the indicator
The drain pump can operate
shortly before the appliance
fills water.
CLICK
4.
9.7 Starting a programme with
the delay start
1. Touch the Inicio Diferido button until
the display shows the desired delay time.
The related indicator comes on.
2. Touch the Inicio/Pausa
appliance lid locks and starts the
countdown of the delay start. The display
shows the indicator
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after
the countdown has started
To cancel the delay start:
button to start
1. Touch the Inicio/Pausa
2. Touch the Inicio Diferido button
3. Touch the Inicio/Pausa
.
Changing the delay start after
the countdown has started
To change the delay start:
pause the appliance. The related
indicator flashes.
repeatedly until the display shows .
again to start the programme
immediately.
B
button. The
.
button to
button
Advertisement
Table of Contents
