Installing The Kodak Share Button App; Installing The Share Button App - Kodak M790 User Manual

urg_01373.book Page 8 Thursday, November 3, 2011 9:50 AM
2
Installing the KODAK Share Button
App
Before you can share pictures/videos, you must:
■
Install the KODAK Share Button App.
See

Installing the Share Button App

■
Perform a one-time setup.
See Setting up the Share Button App (a one-time setup), page
Installing the Share Button App
1
Make sure the computer is connected to the Internet.
2
Turn off the camera.
3
Using the USB cable, connect the camera to a computer USB port.
The camera turns on. The Camera Setup App runs. (If there are many
pictures/videos on your memory card, this step could take several
minutes.)
If you successfully installed the software
See "Setting up the Share Button App (a one-time setup)" on page 9.
8
(below).
4
Watch your computer—when the
Camera Setup App prompts you,
click Install Now. (If you're
prompted to allow the Camera
Setup App to run, click Allow.)
5
When prompted, click Finish.
www.kodak.com/go/support
9.