Table of Contents
Advertisement
USER INSTRUCTIONS: WH-D8 & WH-D10 SUBWOOFER
Before Connecting the Subwoofer
•
Level the subwoofer taking care to make sure it sits squarely on all its spikes.
•
Switch off you amplifier and all connected source units at the mains.
•
Unplug the power cords to all system components if necessary.
•
Make sure the subwoofer is disconnected from the mains and that the ON/OFF switch is OFF.
•
Before re-connecting your system to the AC power supply, check that all the connections are properly
made.
•
Check that all speaker terminals are done up tightly.
•
Ensure that there are no strands of wire shorting adjacent speaker terminals.
•
Signal cables should be properly terminated and fully screened to minimise hum. If you connect your
subwoofer via low level signals inputs, the cable between your control unit or processor and the
subwoofer could be quite long so screening is particularly important. Consult your dealer if in doubt.
CONNECTING THE SUBWOOFER TO THE SYSTEM
Control Panel of the WH-D8 Subwoofer
9
8
7
1
2
3
4
5
6
① Power Indicator
Volume Control
②
C r o s s o v e r F r e q u e n c y
③
Control
Phase Switch
④
Auto Sense Switch
⑤
Line Level Inputs/ LFE
⑥
Input
IEC Mains Input Socket
⑦
Mains Power Fuse
⑧
Mains Power Switch
⑨
Hide quick links:
Advertisement
Table of Contents
