Naming The Server; Installing The Fiery Spark Server Software - Epson Stylus Pro 10000 Quick Installation Manual

6 | Quick Installation Guide
6. Enter the IP address, subnet mask, and/or default gateway provided by
your Network Administrator.

Naming the Server

1. Right click on
2. Select
Properties
3. Open the Network Identification tab and click the
4. Type a descriptive name for the server and click
Macintosh clients, use 8 characters or less so you'll be able to see the server
name and print queue in the Chooser.)
5. Click again.
OK
6. When you see the prompt to restart the computer, click

Installing the Fiery Spark Server Software

1. Insert the System Software CD-ROM in your CD-ROM or DVD drive.
2. Double-click
CD-ROM icon.
3. Open the
Fiery
4. When you see the Install Shield Wizard screen, click
5. Read the license agreement and click
My Computer
.
My Computer
folder and double-click the
.
OK
, then double-click the
Setup
.
Yes
button.
Properties
. (If it is connected to
.
Yes
Fiery
icon.
.
Next