Programme settings
Depending on the programme, you can use the programme
settings to adjust the washing process even more efficiently
to your items of washing.
Programme settings:
²
– are active without acknowledgement.
– not retained after appliance is switched off.
– can be selected or deselected or changed depending
Buttons
Temperature
Spin
Finished in
Finished in
EcoPerfect
TurboPerfect
Easy-Iron
{
on the programme progress.
Notes
×
Ö
Before and during the programme the presettings
,
can be changed depending on the programme
progress.
The maximum temperature depends
×
Ö
,
on the programme and the maximum spin speed
depends on the programme and model.
×
Ö
Delays the Finished in time (end of programme).
,
Before the programme starts, the end of the pro-
gramme can be preselected in h steps up to
maximum 24h (h = Hour).
When the programme has started, the preselected
time is displayed e.g. for 8h and counts down until
the wash programme starts. Then the programme
duration is displayed, e.g. 2:30h.
When the programme has started, the preselected
1. Select inicio/pausa carga (Start/Reload) A.
time can be changed as follows:
2. Select Terminado en (Finished in) button and
3. Select inicio/pausa carga (Start/Reload) A.
To activate/deactivate the Childlock. ~ Page 19
×
For saving energy.
For a shorter wash time.
Reduces creasing by special spin sequence followed
²
by fluffing and reduced spin speed.
creased.
change Finished in time.
Residual moisture of the washing is slightly in-
27