Install The Ink Cartridges - Epson Stylus Photo R300 Series Quick Reference

3
3
Install the
Install the
Ink Cartridges
Ink Cartridges
1
Flip open the paper support
and pull up the extension.
2
Open the output tray,
then pull out the extension.
3
Lift the printer cover.
4
Unwrap the ink cartridges.
5
Open the cartridge cover and
remove the paper insert.
6
Lower each cartridge into its holder with
the green circuit board facing the front.
The color of the cartridge label should
match the marker on the holder.
Then gently push each ink cartridge
down until it is firmly seated.
7
Close the cartridge cover.
8
Press forward on the front left corner of
the cartridge cover to lock it in place.
9
Press the
and close the printer cover.
CAUTION: Don't turn off the
printer or interrupt charging
while the light is flashing or
you'll waste ink.
A progress bar is displayed on the
LCD panel during ink charging.
10
After ink charging is finished,
press OK.
Maintenance button
Don't touch the green circuit
board or remove any labels.