Epson Stylus Photo R3000 Series User Manual page 12

Epson stylus photo r3000: user guide

Hide thumbs Also See for Stylus Photo R3000 Series:

Table of Contents

5. Place the roll paper holders on each end of the paper roll as shown. The

holders are labeled

printer.

6. Open the rear support but don't extend it.

7. Attach the roll paper holders as shown. Hook the holders onto the attachment

points indicated with orange labels.

8. Feed the paper into the printer until it meets resistance. In a few seconds, the

paper loads automatically.

Note:

When loading canvas media, leave 2 to 3 inches of slack in the roll as it feeds and

prints for the best results. If you have trouble feeding canvas media, check that the

edge is straight and reload it, making sure to keep the roll slack.

Loading Paper

and

(for left and right), as viewed from the front of the

Table of Contents

Show Quick Links

Table of Contents