Usb Modem - D-Link DSL-G2452GR User Manual

DSL-G2452GR MU-MIMO Wireless Dual Band VDSL2 Router with
ASDL2+/3G/LTE/Gigabit Ethernet WAN Support, 2 FXS Ports and USB Port
User Manual

USB Modem

This menu is designed to operate USB modems.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, the relevant
notification will be displayed in the top right corner of the page.
Click the ENTER button. When the USB Modem / PIN page opens, enter the PIN code in the
Authorization section.
APPLY button.
Some USB modems in the router mode and Android smartphones in the modem mode have an IP
address from the subnet which coincides with the router's local subnet. In this case, the router's
web-based interface can be unavailable. For correct operation, disconnect the device from the USB
port and reboot the router. Then access the web-based interface, go to the Connections Setup /
LAN page, and change the value of the IP address field on the IPv4 tab (for example, specify the
value 192.168.2.1). Wait until the router is rebooted.
14 For some models of USB modems it is required to disable the PIN code check on the SIM card prior to connecting
the USB modem to the router.
Figure 135. The notification on the PIN code check.
14 Click the Show icon (
Figure 136. Entering the PIN code.
Page 171 of 262
Configuring via Web-based Interface
) to display the entered code. Then click the