Epson Stylus Photo 895 Setup Manual page 11

3. Select Install Printer Driver/Utility, and
click .
Note:
It is possible to install the Reference Guide
on your hard drive from the Installer dialog
box, as shown to the right. To install the
guide, click Online Guide and then
Next, click Install Reference Guide and
follow the on-screen instructions. When the
installation is complete, an ESP 895
Guide icon will appear in the EPSON folder. Double-click the icon to open
the guide.
4. Click OK in the dialog box that appears.
If Problem Solver is available in your location, it is automatically
installed on your hard drive.
Note:
The Problem Solver provides tips and instructions to help you solve most
problems you may encounter when printing. The Problem Solver can be
accessed through the EPSON folder, Status Monitor 3, or the printer
software. For details, see the "Diagnosing the Problem" section of your
online Reference Guide.
5. Follow the on-screen instructions to turn on your printer.
USB device driver installation starts automatically at this point for
printers connected via the USB cable. When a message appears
asking you to restart your computer, do so.
For Windows 2000 users, go to the next step, "For Windows 2000
Users".
6. When a message appears informing you that the installation is
complete, click OK.
Note:
If an error message appears, it means either the printer software or the
EPSON USB printer device driver has not been installed correctly. See
"Correcting USB Problems" in the online Reference Guide for details.
.