Epson Stylus Photo 825 Printer Basics Manual page 73

Lower the cartridge so that the tabs rest on the hooks as shown:
7. Press down firmly on the ink
cartridge clamp until it snaps in
place.
8. If you need to replace the other ink
cartridge, repeat steps 3 through 7
before continuing with step 9.
9. Press the e ink cartridge
replacement button and close the
printer cover. The printer begins
charging the ink delivery system.
The
Processing
printer makes noise. Charging takes
about one minute. When it's finished,
the
Processing
and stays on, and the red
light goes out.
Caution: Never turn off the printer while the Processing light is flashing, unless
the printer hasn't moved or made noise for more than 5 minutes.
light flashes, and the
light stops flashing
b error
Caution: Don't place the cartridge
under the hooks; you may damage
the clamp when you close it.
Maintaining Your Printer
67