Table of Contents
Advertisement
No included cables are used with these connections:
Please purchase the necessary cables at your local store.
●
Before you connect the AC power cord:
Be sure other devices are connected properly before plugging in
the AC power cord.
Selecting your connection quality
HDMI - Highest quality
Supports high-definition digital signals and gives highest picture
and sound quality. Video and audio signals are combined in one
cable. You must use HDMI for full high-definition video and to
enable fun-Link (HDMI CEC).
Note(s)
MAGNAVOX HDMI supports HDCP (High-bandwidth Digital Contents
●
Protection). HDCP is a form of digital rights management that protects high-
definition content in Blu-ray Disc™ or DVDs.
Component (Y Pb Pr) - High quality
Supports high-definition analog signals but gives lower picture
quality than HDMI. Component (Y/Pb/Pr) video cables combine
red / green / blue video cables with red / white audio (L/R) cables.
Match the cable colors when you connect to the TV.
Composite - Basic quality
For analog connections. Composite video / Audio analog cable
usually combine a yellow video cable with red / white audio (L/R)
cables. With this unit, yellow cable must be connected to Y (green)
jack on the component video input jacks.
Connecting your devices
HDMI digital connection
HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high-
definition digital video and multi-channel digital audio through a
single cable.
IN
HDMI-DVI connection
This unit can be connected to a device that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it
requires audio cable for analog audio signal as well.
IN
HDMI-DVI conversion
IN
Note(s)
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed
●
HDMI cable is recommended for the better compatibility.
For HDMI connection
The unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of video
●
signals,
32kHz / 44.1kHz and 48kHz of audio signals.
This unit accepts a 5.1 channel audio signal (Dolby Digital) and 2 channel
●
audio signal (LPCM).
If audio source is 7.1 channel audio signal (Dolby Digital) and user selects
●
Multichannel at Digital output format, then the digital audio output will be
5.1 channel audio signal (Dolby Digital).
This unit accepts only signals in compliance with EIA861.
●
For HDMI-DVI connection
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
●
HDMI-DVI connection requires separate audio connections as well and the
●
audio signals are output as analog (L/R) audio.
DVI does not display 480i image which is not in compliance with EIA/
●
CEA-861/861B.
12
Set-top box
or
Blu-ray Disc™ /
DVD player
or
OUT
HDMI cable
HD game console
Audio (L/R)
OUT
cables
Cable receiver or
set-top box with
the DVI output
jack
cable
OUT
Continued on next page.
.
English
Advertisement
Table of Contents
