Transporting The Printer; Related Documentation - Epson Stylus Color 900 Product Information Manual

EPSON Stylus COLOR 900

Transporting the Printer

If you move your printer some distance, you need to prepare it
for transportation in its original box. Follow these steps:
To avoid damage, always leave the ink cartridges
installed when transporting the printer.
Be sure to remove the tape used in step 4 after installing
the printer in its new location.
1. Turn on the printer and wait until the print head locks in
the far right position. Then turn off the printer.
2. Unplug the power cord from the electrical outlet. Then
disconnect the printer cable from the printer.
3. Remove any paper from the printer and remove the paper
support.
4. Open the printer cover. Secure the ink cartridge holder to
the printer with tape as shown, then close the printer cover.
5. Push in the output tray extensions and close the tray.
6. Repack the printer and attachments in the original box
using the protective materials that came with it. See the
unpacking sheet that was packed with your printer.
Be sure to keep the printer level as you transport it. If you
notice a decline in print quality after transporting the printer,
clean the print head (see page 10); if output is misaligned,
align the print head (see page 11).
12 - EPSON Stylus COLOR 900

Related Documentation

TM-SC900 EPSON Stylus COLOR 900 Service
Manual
PL-SC900 EPSON Stylus COLOR 900 Parts Price
List
CPD-7737 EPSON Stylus COLOR 900 Printer
Basics
CPD-7738 EPSON Stylus COLOR 900 Start Here
ESC9001298 EPSON Stylus COLOR 900 Manual
(Adobe Acrobat format, pdf)
1/99