Electrolux Frigidaire GRFG2353AF Use & Care Manual page 14

14
DOOR REMOVAL

NOTE
Upon replacement, the tube needs to
be fully inserted up to the marking line.
3. Reinstall top hinges and screws.
4. Insert and feed water line back into
the conduit at the top left door
hinge until tube re-appears at rear
of unit.
5. Reconnect all harnesses.
6. Replace top hinge covers and
screws.
7. Reconnect water line to push-lock
connection and reinstall water line
bulkhead cover at rear of unit.
8. Reconnect electrical power cord to
the wall outlet
To reset door pin:
If doors are removed at less than a 40
degree angle, the pin returns to the home
position. It can be reset by turning the
door upside down and using a 5/32" Allen
wrench to rotate the left hand pin 90
degrees clockwise and the right hand pin
90 degrees counterclockwise.
RIGHT DOOR,
Push
Push
Once the door pins are reset, follow the
steps "To reinstall the refrigerator doors".
For
turn pin 90˚
counter-
clockwise
For
LEFT DOOR,
turn pin 90˚
clockwise