Printing From Start To Finish; Printing With A Macintosh - Epson Stylus Color 740i Printer Basics Manual

Epson stylus color 740i: user guide
Hide thumbs Also See for Stylus Color 740i:
Table of Contents

Advertisement

Printing from Start to Finish

Here are the steps for printing a basic document on plain, letter-size paper, such as a
memo, newsletter, or photograph—from loading the paper to selecting print settings
to controlling print jobs. Follow the step-by-step instructions in this section.
For guidelines on loading special papers and envelopes, and for selecting the correct
Media Type setting for them, see page 11.
For instructions on customizing your settings to fine-tune your printouts, see page 15.
For guidelines on preserving photos, see page 18.

Printing with a Macintosh

1. Make sure your printer and Macintosh are turned on.
2. Load a stack of plain paper and place it against the right edge guide. Then slide
the left edge guide against the paper's left edge, making sure the stack is lower
than the arrow on the guide. If you are using letterhead or preprinted paper, be
sure the top of the paper feeds into the printer first.
load paper only
up to this arrow
3. Open an application program and select a document to print.
slide paper against the
right edge guide
9

Advertisement

Table of Contents
loading

Table of Contents