EVGA 37062314 User Manual page 86

EVGA Z390 DARK (131-CS-E399)
Before you can assign a drive letter to a drive or array, the initialized disk must be
partitioned. If you are following this guide and just initialized your drive or array, the
New Simple Volume Wizard will automatically pop-up.
If your drive or array is initialized, but not partitioned, the disk will appear in Disk
Management as "Unallocated," as shown in the image below. Right-click on the box
containing "Unallocated" and select "New Simple Volume" (this text may vary slightly
based on operating system). The New Simple Volume Wizard will pop-up.
When the window below opens, click "Next."
- 86 -