If The Oven Is To Switch On And Off Automatically; Rapid Heating; Setting The Clock; Setting The Timer - Bosch HGV74W256N Instruction Manual

Setting the cooking time if the clock is hidden
0
Press the Clock button twice and make your settings as
described in point 4.
If the oven is to switch on and off
automatically
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Example in the picture: Setting for
190 °C. It is 10:45 . The meal takes 45 minutes to cook and
should be ready at 12:45 .
The function selector is used to set the type of heating.
1.
2. The temperature selector is used to set the temperature or
grill setting.
0
Press the Clock button.
3.
@ A
4. Use the or button to set the cooking time.
0
Press the Clock button repeatedly until the
5.
flashes.
You can see in the display when the meal will be ready.
PLQ
@
Use the button to set a later end time.
6.
The setting is adopted after a few seconds.
The end time is shown in the display until the oven starts.

Setting the clock

0
When the appliance is connected for the first time or after a
power cut, the symbol and three zeros flash in the display.
Set the clock. The function selector must be switched off.
Setting procedure

Setting the timer

You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has a special signal. This means that you
can tell whether the timer duration or the cooking time has
elapsed. You can also set the timer if the childproof lock is
active.
Setting procedure
S
S
Press the Timer button.
1.
The symbol flashes.
Use the - or + button to change the timer duration.
2.
Default value for + button = 10 minutes
Default value for - button = 5 minutes
The timer starts after a few seconds. The
the display. You will see the time counting down.
When the time has elapsed
14
%
Top/bottom heating at
y
End symbol
K
PLQ
VHF
S
symbol lights up in
PLQ
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.

Rapid heating

With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are
selected.
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
1. Set the function selector to
Turn the temperature selector to set the desired temperature.
2.
p
The symbol lights up in the display. The oven begins to heat
up.
The rapid heating process is complete.
p
The symbol goes out in the display. Place your dish in the
oven and select the desired type of heating.
0
1. Press the Clock button.
12.00 appears in the display and the
Use the + or - button to change the clock.
2.
After a few seconds, the time is saved. The
out.
Changing from summer to winter time, for example
0
Press the Clock button twice and change the time using the
+ or - button.
A signal sounds. Press the
Changing the timer duration
S
Press the Timer button. Use the + or - button to change the
time.
Cancelling the setting
S
Press the Timer button. Press the - button until zero is shown
on the display.
The timer and cooking time count down at the same time
Both symbols light up. You can see the timer duration counting
x
down in the display.
To call up the remaining cooking time,
0
clock:
Press the Clock button repeatedly until the relevant symbol
appears.
K PLQ
VHF
0
I
.
0
symbol flashes.
0
symbol goes
S
Timer button. The timer goes out.
y
end time or
button
0