Installing The Printer Software; Installing In Windows - Epson Stylus Color 460 Setup Manual

After connecting the printer to your computer, you need to install the
software included on the "Printer Software for EPSON Stylus COLOR 460"
CD-ROM shipped with your printer.
Your printer software includes:
Printer driver
The printer driver is the software that runs, or "drives," your printer.
With it, you can make settings such as print quality, speed, media type,
and paper size.
Utilities
The Nozzle Check, Head Cleaning, and Print Head Alignment utilities
help you keep your printer in top operating condition. EPSON Status
Monitor 3 (for Windows) or EPSON StatusMonitor (for Macintosh)
notifies you of printer errors and displays printer status information
such as the amount of ink remaining. The Status Monitor also guides
you when replacing ink cartridges.
Online Guides
The online Reference Guide and Color Guide help you learn more about
your printer and color printing.
If you are using the floppy disk version of the software, make a backup copy
of the EPSON printer software disk before you begin installation. If you
wish to make a floppy disk version of the printer software on your CD-
ROM, you can use the driver disk creation utility included on the CD.

Installing in Windows

1. Insert the printer software CD shipped with your printer in the CD-
ROM drive. The Installer dialog box appears. (For floppy disk users,
insert the disk in a disk drive, double-click the My Computer icon and
then double-click the floppy disk drive icon and then Setup.exe)
2. Click Install to start the printer software installation.
3. When the installation is complete, click OK.
Note:
If the New Hardware Found screen or any other Wizard appears when you turn on
your computer, click Cancel and follow the steps above.
Copyright © 1999 by SEIKO EPSON CORPORATION,
Nagano, Japan.

Installing the Printer Software

Printed in Japan 99.xx-xx