Epson Stylus Color 400 User Manual page 15

Introduction
Place the printer near a wall outlet where the plug can be
easily unplugged.
Placez l'imprimante près d'une prise de contacte où la fiche
peut être débranchée facilement.
Do not let the power cord become damaged or frayed.
If you use an extension cord with the printer, make sure
the total ampere rating of the devices plugged into the
extension cord does not exceed the cord's ampere rating.
Also, make sure the total ampere rating of all devices
plugged into the wall outlet does not exceed the wall
outlet's ampere rating.
Except as specifically explained in this User's Guide, do not
attempt to service the printer yourself.
Unplug the printer and refer servicing to qualified service
personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered
the printer; if the printer has been dropped or the cabinet
damaged; if the printer does not operate normally or
exhibits a distinct change in performance. Adjust only those
controls that are covered by the operating instructions.
7