Epson Stylus Color 400 Quick Setup Manual page 9

Note:
If your computer is on a
network and you connected
the printer to a remote
server, you need to set up
the printer for network use
after installing the printer
software. See Chapter 5 of
your User's Guide for
instructions.
While Running Windows 95
1. Make sure Windows 95 is running and the printer is on.
Exit any open applications.
2. Insert the EPSON printer software CD-ROM (or diskette 1)
in your drive.
3. If Windows 95 launches the install program automatically,
you see the EPSON Setup CD window. Click Next. At the
next screen, click the Install icon.
If it doesn't launch automatically, double-click the
My Computer icon; then double-click your CD-ROM
drive icon. You see the EPSON Setup CD window. Click
Next. At the next screen, click the Install icon.
(If you're using diskettes, double-click your diskette drive
icon and click the Setup icon.)
4. Select Epson Stylus COLOR 400 in the printer Model Tab
and click OK. Follow the instructions on the screen to
install the software.
The installer creates an EPSON folder for your printer software
icons and adds an icon for your printer to the Printers folder. If
you installed your software from the CD-ROM, EPSON
Answers opens automatically.
After running EPSON Answers, click the EPSON Look Your
Best Color Pak icon in the EPSON folder to install your
creative software and check out the extras.
To run EPSON Answers, click its icon in the EPSON folder.
9