Table of Contents
Advertisement
10.
WI-FI - CONNECTIVITY SETUP
This chapter describes how to connect
the smart appliance to the Wi-Fi network
and to link it to mobile devices.
By this functionality you can receive
notifications, control and monitor your
appliance from your mobile devices.
To connect the appliance to enjoy the full
range of features and services you need:
• Wireless network at home with
internet connection enabled.
• Mobile device connected to wireless
network.
Frequency
Protocol
Max Power
10.1 Installing and
configuring "My AEG"
"My AEG" allows you to
control your laundry through
a mobile device.
It contains a large number of
programmes, useful features
and product information
tailored perfectly to the
appliance.
Through the app you can
select the programmes
already available from the
appliance control panel, plus
unlock additional
programmes available only
from a mobile device
Additional programmes can
change over the time along
with new versions of the
app.
It's personalized laundry
care - all from your mobile
device.
When connecting the appliance to the
application, stand near it with your smart
device.
2.412 - 2.472 GHz
for European mar‐
ket
IEEE 802.11b/g/n
two stream radio
<20 dBm
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart
device.
2. Download and install the App "My
AEG" .
3. Make sure you started a Wi-fi
connection in the appliance. If not,
read the next paragraph 'Configuring
the appliance wireless connection'.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in "My
AEG" .
5. Follow the instructions on the App for
the appliance registration and
configuration.
10.2 Configuring the washing
machine wireless connection
1. Press and hold the Aan/Uit button for
a few seconds to activate the
appliance. Wait about 10 seconds
before proceeding with wireless
configuration.
2. Press and hold the
buttons for a few seconds
simultaneously until a 'click' sounds.
Release the buttons.
the display for 5 seconds and the
indicator
starts blinking.
The wireless module begins starting up.
Make sure that you APP is
ready for connection.
3. After about 45 seconds,
(Access Point) appears on the
display.
ENGLISH
33
and the
appears on
Advertisement
Table of Contents
