Advertisement
5KSMTHPS: This accessory has been approved for use with all 4.3 L (4.5 Qt) and 4.7 L
(5 Qt) KitchenAid Tilt-Head Stand Mixers with metal bowls.
5KSMBLPS: This Accessory has been approved for use with all 5/5.5/6/7 Qt Bowl Lift
KitchenAid Stand Mixers with Stainless Steel Bowl, except model numbers 5KPM5, 5K5,
4KSM5, 5K5SS, 5KSM5, 5KSM50, 5KSM500, 5KSM6573, KG25, 3KSM5, 9KSM5, and
5KSM450.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed.
Please refer to the basic Important Safeguards as outlined in the Instructions Manual
included with your Stand Mixer.
SAVE THESE INSTRUCTIONS
PRODUCT USAGE
1. Turn the Stand Mixer OFF/0 and unplug.
2. Attach bowl and flat beater, dough hook, or wire whip to the mixer.
For tilt head users: Attach bowl and flat beater, dough hook, or wire whip to
the mixer and lower and lock the motor head.
For bowl lift users: Attach flat beater, dough hook, or wire whip to the mixer.
Attach bowl and raise into locked position.
3. Place the Pouring Shield: Place the shield onto the bowl so that the motor
head covers the u-shaped gap in the shield. This will position the pouring chute
just to the right of the attachment hub as you face the mixer. Press lightly so that
the Easy Snap tabs snap the shield onto the bowl.
4. Pour ingredients into the bowl through the Pouring Chute.
DISASSEMBLING THE PRODUCT
1. Turn the Stand Mixer OFF/0 and unplug.
2. Lift the front of the Pouring shield off of the bowl.
CARE AND CLEANING
1. Wash the Pouring Shield in warm, soapy water or place it in the top rack of your
dishwasher.
2
W11441910B_01_EN.indd 2
W11441910B_01_EN.indd 2
28-05-2021 15:42:52
28-05-2021 15:42:52
Advertisement
