Transporting The Printer; Related Documentation - Epson Stylus C62 Product Information

Transporting the Printer

If you move your printer some distance, you need to prepare it
for transportation in its original box or one of a similar size.
To avoid damage, always leave the ink cartridges
installed when transporting the printer.
Be sure to remove the tape used in step 4 after
installing the printer in its new location.
1. Turn on the printer, wait until the print head locks in the
far right position, then turn off the printer.
2. Unplug the power cord from the electrical outlet. Then
disconnect the printer cable from the printer.
3. Remove any paper from the printer and remove the paper
support.
4. Open the printer cover. Secure the ink cartridge holder to
the printer with tape as shown, then close the printer cover.
5. Push in the output tray extension and close the tray.
6. Repack the printer and its attachments in the original box
using the protective materials that came with them. See
your Start Here sheet.
Keep the printer level as you transport it.
After transporting the printer, remove the tape securing the
print head and test your printer. If you notice a decline in
print quality, clean the print head (see page 7); if output is
misaligned, align the print head (see page 8).

Related Documentation

CPD-14476 EPSON Stylus C62 Start Here
CPD-14477 EPSON Stylus C62 Printer Basics
CPD-14343 EPSON Stylus C62 CD-ROM with Print
Show movies and Reference Guide
PL-SC62 EPSON Stylus C62 Parts Price List
Tape the ink
cartridge holder to
the printer case
10/02
EPSON Stylus C62
EPSON Stylus C62
- 9