JVC LT-46DZ7BJ Instructions Manual page 9

Initial settings
3
Confirm the language
Language for on-screen analogue

> Language
channel displays and menus
(excluding the DTV menu)
 When not using analogue channels
 When using analogue channels (or cable TV)
4
Set analogue channels
1
Register analogue channels
> Auto Program
Country
United Kingdom
Deutschland
France
Italia
España
Nederland
Belgium
14%
2
Check what was registered
> Edit
PR ID
AV
01 BBC1
02 BBC2
03 ITV
CH4
04
05 CH5
06
07
08
09
3
Set TV-LINK
T-V LINK
Download TV Recording Device
5
Initial setting is complete
 Edit digital channels Editing digital channels (P. 47)

 If digital channel reception is poor
 If analogue channel reception is poor
 Some digital channels cannot be watched on this TV.
13
(continued)
 When change a language
@
 
⁄
 
 When change a country
select
Ireland
Switzerland
Danmark
Sverige
Österreich
Norge
Suomi
If "ACI Start" appears, select and start settings.

Auto Program
>>
(This will set up cable television channels.)
CH 28
"What is "ACI" (Automatic Channel

Installation)?" (P. 56)
 Edit analogue channels  Confirm
CH
in "Editing analogue
 @
CH 21
CH 22
channels" (P. 49)
CH 23
CH
24
CH 25
CH 26
CH 27
CH 28
 When not using
 When using T-V LINK
T-V LINK
If "Feature Not

Available" appears :
Is a T-V LINK compatible

device connected to EXT-2?
 Is the device turned on?
When the digital channel reception is poor (P. 14)

Troubleshooting (P. 51)

(P. 57)

When the TV cannot find the digital channels
select
 Is the TV connected correctly to the aerial?
 Change the direction of the indoor aerial.
 Is there a digital channels transmission tower nearby?
 Turn "Attenuator" to "On" (P. 36), since the radio waves are too strong.
Register digital channels again

 If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak.
When the digital channel reception is poor
The "Missing or weak signal" message appears.
Is the TV connected correctly to the aerial?

Change the direction of the indoor aerial.

 Is there a digital channels transmission tower nearby?
 Turn "Attenuator" to "On" (P. 36), since the radio waves are too strong.
 Check digital channels signal
 If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak.
Check the following points
"Service Scan" (P. 45)

Consult your retailer

Check the following points
 Signal Check (P. 45)
 Consult your retailer
14