GE GTD45EBMR Owner's Manual page 12

Before you call for service...
Problem
Small amount of water
on floor in front of dryer
Water on floor in back
of dryer
Water drips from door
when opened after a
Steam Cycle
Cannot see steam at
beginning of cycle
Cannot see steam at any
time during the cycle
Garment still wrinkled
after steam cycle (Not all
features are on all models)
Dryer continues to
tumble after display
says complete
Garments are wet after
Steam cycle (Not all
features are on all models)
No numbers displayed
during cycle, only lights
Time Reamaining
jumped to a lower
number
Dryer is running but 00
is displayed in Time
Reamaining
Clothes are still wet and
dryer shuts off after a
short time
12
Possible Causes
Inadequate load size for steam
cycle selected, excess steam
condenses inside cabinet and
leaks out
Loose water hose connection to
valve
Hose missing rubber washer at
connection with valve
Steam condenses on inner door • This is normal.
Steam released at different
time in cycle
The steam nozzle might be
clogged with debris from your
water supply
Too many garments
Extended/Dewrinkle Tumble
was selected
Lint filter not clean
Load is children/infant garments
Dryer is continuously
monitoring the amount of
moisture in the clothes
The estimated time may change
when a smaller load than usual
is drying
The Extended/Dewrinkle Tumble
option was chosen
The door was opened mid-cycle.
The load was then removed from
the dryer and a new load put in
without selecting a new cycle
Small load
Load was already dry except for
collars and waistbands
Dryer is not level
What To Do
• If using the Steam Dewrinkle cycle, manually reduce time. If
using the Steam Refresh cycle, add more.
• Install rubber washer provided with hose.
• This is normal.
• Call 1.800.561.3344 to order nozzle replacement kit
WW03A00189 or to request a service technician to replace
this for you.
• Load fewer garments; manuallly icrease time.
• Ensure Extended/Dewrinkle Tumble option is not selected. For
the Steam Refresh cycle, Extended/Dewrinkle Tumble will
automatically be turned on and cannot be turned off.
• Clean lint filter.
• Use the Steam Refresh cycle.
• This is normal. When the dryer senses a low leveñ of
moisture in the load, the dryer will display the dry time
remaining.
• This is normal.
• This is normal. During Extended/Dewrinkle Tumble, the time
remaining is not displayed. The extended tumbling option lasts
approximately 60 minutes; dewrinkle 60 minutes.
• This is normal. During Extended/Dewrinkle Tumble, the time
remaining is not displayed. The extended tumbling option lasts
approximately 60 minutes; dewrinkle 60 minutes.
• When drying 3 items or less, choose Speed Dry (Not all
features are on all models) or Timed Dry.
• Choose Speed Dry or Timed Dry to dry damp collars and
waistbands. In the future, when drying a load with collars
and waistbands, choose More Dry or Sanifresh.
• Move dryer to an even floor space or adjust leveling legs as
necessary until even.