Epson PictureMate Snap PM 240 Start Here Manual page 3

2
Slide the cartridge lever left
to the Release position.
3
Remove the initial photo cartridge
from its package.
Caution:
different PictureMate
cartridge for initial setup.
Install only the initial photo cartridge
that came with PictureMate.
4
Slide the cartridge straight into the slot, label side up,
until it clicks into place. It will not go in all the way.
5
Slide the lever all the way right, to the Lock position.
6
Close the cartridge door.
PictureMate charges the print head for
3 to 4 minutes and displays the screen above.
7
When you see the
Charging complete
message on the photo
viewer screen, press OK.
Do not install a
Press here
Turn over