Volvo Trucks North America, Inc.
Service Bulletin
Sending and Receiving Messages
The system has the ability to send brief text messages
to and from the vehicle, similar to an e-mail system. It
uses the vehicle's graphic display in the instrument clus-
ter for viewing and entering the messages.
The controls for the graphic display are the 4 buttons in
the stalk switch on the right side of the steering column.
1
"Esc" (Escape) is used to return to the previous
menu and cancel a setting/operation.
↵
2
"
"or "SELECT" confirms a highlighted selection of
a menu or character.
3
"Up arrow" moves the cursor up and is used when
setting alpha-numeric values.
4
"Down arrow" moves the cursor down and is used
when setting alpha-numeric values.
For more information on using the graphic display con-
trols, see the Operator's Manual, or service information
on "Instrumentation" in group 38.
Using the Graphic Display
1
The Volvo Link menu should be the first item shown
in the graphic display. Use the up/down buttons to
highlight it.
↵
2
Press
to select Volvo Link.
3
After selecting Volvo Link, another screen will pop
up, offering the choice to send or read messages.
4
For instructions on sending and receiving mes-
sages, see the following:
•
"Sending Messages from the Vehicle" page 8
•
"Incoming Message Notification from Fleet"
page 6
•
"Quick Response to Incoming Messages" page
7
•
"Viewing Messages" page 7.
Date
3.2002
VOLVO LINK
GAUGES
FUEL ECONOMY
TIME/DIST
Read Messages
Send Messages
Group
No.
397
001
T3008810
Page
5(32)
"
#