Table of Contents
Advertisement
■ Touch panel
● Placing stickers or sheets (e.g. protective films, peep prevention sheets) on
the display might hinder correct operation of the touch panel.
● When carrying the product in your pocket or bag, take care not to put the
touch panel close to metals or other conductive materials, as it might cause
false operation of the touch panel.
● The touch panel is designed to be lightly touched by fingers. Do not apply
strong pressure with your fingers or sharp-pointed objects (such as
ballpoint pens and pins) on the touch panel.
In the following cases, the touch panel may not work even if you touch it.
May cause a malfunction.
• Operation with a gloved finger
• Operation with the tip of a fingernail
• Operation with foreign object placed on the operation pad
• Operation on the touch panel on which a protective film, sticker, etc. is
put
• Operation while water drops or condensations are left attached to the
display
• Operation with wet fingers or moisture fingers with sweat
• Operation under water
■ Organic EL (OLED) display
● Although lighting intensity of OLED can be decreased partly and displayed
color can be changed when the same image has been displayed for a long
time, the brightness set to bright more than necessary or using extremely
for a long time. It is not abnormal because that is the characteristic of
OLED.
● Although the OLED used on the product is made using high-precision
technology, some pixels (dots) might be lit or out at all times. Or color may
be changed or unevenness of brightness may be shown if looked at from
different angles. Note that that is because of the structure of OLED, not a
fault.
● Leaving the OLED exposed to the direct sunlight might cause a fault. Take
care when you place the product by the window or outside.
- 27 -
Advertisement
Table of Contents
