Epson LQ-2180 Manual page 4

EPSON LQ-2180
Thickness 0.0025 to 0.0055 inch (0.065 to 0.14 mm)
Weight 14 to 24 lb (52 to 90 g/m
Single-sheet multi-part forms:
front, top, and cut-sheet feeder entry
Width Front and Top
3.9 to 16.5 inches (100 to 420 mm)
High-capacity cut-sheet feeder
3.9 to 11.7 inches (100 to 297 mm)
Length Front
5.8 to 16.5 inches (148 to 420 mm)
Top
3.9 to 16.5 inches (100 to 420 mm)
High-capacity cut-sheet feeder
3.9 to 11.7 inches (100 to 297 mm)
Copies 1 original + up to 5 copies
Thickness 0.0047 to 0.018 inch (0.12 to 0.46 mm)
Weight 12 to 15 lb (40 to 58 g/m
Binding Line glue at the top of form
(both front and top entry)
Single side line glue (front entry only)
Envelopes:
top entry only
Size No. 6: 6.5
No. 10: 9.5
Thickness 0.0063 to 0.0197 inch (0.16 to 0.52 mm)
Weight 12 to 24 lb (45 to 90 g/m
Postcards:
front and top entry
Width 3.9 to 5.8 inches (100 to 148 mm)
Length Front
5.8 inches (148 mm)
Top
3.9 to 5.8 inches (100 to 148 mm)
Thickness 0.0087 inch (0.22 mm)
Weight 51 lb (192 g/m
4 - EPSON LQ-2180
2 )
2
)
3.6 inches (165 92 mm)
4.1 inches (241 105 mm)
2
)
2 )
Continuous paper (standard and multi-part):
front, rear, and bottom entry
Width 4.0 to 16.0 inches (101 to 406 mm)
Length 4.0 to 22.0 inches (101 to 558 mm)
Copies 1 original + up to 5 copies
Thickness Printable area
0.0025 to 0.018 inch (0.065 to 0.46 mm)
Perforated edges
up to 0.035 inch (0.9 mm)
Weight (not multi-part)
14 to 22 lb (52 to 82 g/m
Weight (one sheet of multi-part)
12 to 15 lb (40 to 58 g/m
Binding Point glue or paper staples on both sides
(front, bottom, or rear entry)
Note:
Because thick multi-part forms require a straight paper path, load
them in the front slot.
Continuous paper with labels:
front and bottom entry
Label size (minimum)
0.938
0.1 inch (2.5 mm) corner radius
Backing sheet width
4.0 to 16.0 inches (101 to 406 mm)
Backing sheet length (one page)
4.0 to 22.0 inches (101 to 558 mm)
Backing sheet thickness
0.0028 to 0.0035 inch (0.07 to 0.09 mm)
Total thickness
0.0063 to 0.0075 inch (0.16 to 0.19 mm)
Label weight 17 lb (68 g/m
Roll paper:
rear entry with optional roll paper holder only
Width 8.5 0.12 inch (216
Thickness 0.0028 to 0.0035 inch (0.07 to 0.09 mm)
Weight 14 to 22 lb (52 to 82 g/m
2/99
2)
2 )
2.5 inches (23.8 63.5 mm)
2 )
3 mm)
2 )