Related Documentation - Epson LQ-1070+ Product Information Manual

Non-recommended Commands
Epson recommends against using the following commands because
some of these commands are not supported in existing printers and
some are duplicates of other commands.
BEL
Backspace
Bs
Select printer
DC1
Deselect printer
CAN Cancel data
Cancel MSB control
E s c =
ESC? Reassign bit-image mode
Select n/&%inch line spacing
ESCA
ESCK
Select quadruple-density bit-image printing
E s c z
Delete character
DEL
Installation/Support Tips
Most application programs let you specify the type of printer you use
so that the program can take full advantage of the printer's features.
Many of these programs provide an installation or setup section that
presents a list of printers.
Choosing from a menu
To take full advantage of your printer's features, including ESC/P 2,
choose the LQ570+/1070+ or Stylus 800/1000 from the menu. If
these printers are not listed, contact the software manufacturer to see
if an update to the software is available. Until you receive an update,
choose from the following list:
ActionPrinter 5000+
ActionPrinter 5000
LQ-570/1070
LQ-870/1170
LQ-100
SQ-870/1170
LQ-510/550
LQ-500
LQ-86O/LQ-1060
LQ-85O/LQ-1050
LQ-2550
If none of these printers is listed, select the first one available from
the following list:
EX, FX, LX, RX, MS, Epson printer, Standard printer, Draft printer
To use all the features of your printer, however, it is best to choose a
program with your printer on its menu. If your program does not list
this printer, contact the manufacturer of the software to see if an
update is available.
24-Pin Printers
Information Reference List
Engineering Change Notices
None.
Product Support Bulletins
None.
Technical Information Bulletins
None.

Related Documentation

LQ-1070-k Parts Price List
4002064
7/20/93
LQ-1070+
LQ-1070+ - 7