Table of Contents
Advertisement
Preferences
You can set the unit to reduce the power consumption or adjust
the backlight brightness in Location setting.
fun-Link (HDMI CEC) allows you to operate your connected HDMI-
CEC device.
Setting your location to home
Choosing Home gives you full flexibility to change predefined
settings for picture and sound.
1
Use H I to select Preferences, then press OK.
2
Use H I to select Location, then press OK.
Language
Location
Preferences
fun-Link (HDMI CEC)
Restore default settings
HDMI mode
TV placement
Retail Demo
3
Use H I to select Home, then press OK.
The unit will be set up with predefined settings
Retail
for retail displays. In this setting, you can set the
backlight brighter.
The unit is set to maximize the energy efficiency
for home setting and it can be adjusted through
Home
a choice of picture and sound quality selections
according to your preference.
Note(s)
You must set Home in the menu. Otherwise, personalized picture and
●
sound settings will not be memorized after the unit goes into standby mode.
HDMI mode
If there are issues with picture/color and/or sound when
connecting an external device using the HDMI port, please try
switching the HDMI mode following the instructions below.
1
Press Z and use J K to select Setup, then press OK.
2
Use H I J K to select TV settings, then press OK.
3
Use H I to select Installation, then press OK.
4
Use H I to select Preferences, then press OK.
5
Use H I to select HDMI mode, then press OK.
6
Use H I to select HDMI1, HDMI2 or HDMI3, then press OK.
7
Use H I to select 4K mode or 2K mode (Compatibility)
depending on the output capabilities of the external device,
then press OK.
When switching the HDMI configuration, the screen will
●
black out for a moment, then come back on.
Note(s)
The HDMI connector with HDMI mode set to 2K mode (Compatibility)
●
supports up to UHD 30P, while The HDMI connector with HDMI mode set
to 4K mode supports up to UHD 60P with HDR signal.
Switching the HDMI mode may cause loss of HDMI CEC functionality in
●
certain cases.
TV placement
To apply the best settings for your TV, select wall mount or stand
mount.
1
2
3
Retail Demo
When you set Location to Retail, E-sticker (Electronic Sticker) is
displayed. E-sticker can be turned off using procedure below.
1
Retail
2
Home
3
Use fun-Link
Your TV supports fun-Link, which enables one-touch play and one-
touch standby between fun-Link-compliant devices. Compliant
devices must be connected via an HDMI connector.
One-touch play
When you connect your TV to devices that support one-touch play,
you can control your TV and the devices with one remote control.
For example, when you press K (Play) on your DVD remote control,
your TV automatically switches to the correct channel to show the
DVD content.
One-touch standby
When you connect your TV to devices that support standby, you
can use your TV remote control to put your TV and all connected
HDMI devices in standby mode. You can perform one-touch
standby using the remote control from any of the connected HDMI
devices.
System audio control
When you connect your TV to HDMI CEC compliant devices, your
TV can switch automatically to play audio from the connected
device. To use one-touch audio, you must map the audio input
from the connected device to your TV. You can use the remote
control from the connected device to adjust the volume.
Device control
Device control allows you to control fun-Link-compliant devices
using your TV remote control.
HDMI-ARC (Audio Return Channel) (HDMI 2 only)
HDMI-ARC allows you to use fun-Link to output TV audio directly to
a connected audio device, without the need for an additional
digital audio cable. Be sure that the device is HDMI CEC and ARC
compliant, and that the TV is connected to the device using an
HDMI cable attached to both HDMI-ARC connectors.
MAGNAVOX does not guarantee 100% interoperability with all HDMI CEC
●
devices.
The fun-Link-compliant device must be switched on and selected as the
●
source.
Use H I to select Preferences, then press OK.
Use H I to select TV placement, then press OK.
Use H I to select Wall mounted or On a TV stand, then press
OK.
Use H I to select Preferences, then press OK.
Use H I to select Retail Demo, then press OK.
Use H I to select Off, then press OK.
Note(s)
34
.
English
Continued on next page.
Advertisement
Table of Contents
