Table of Contents
Advertisement
18
Light Bulb Replacement
WARNING: Never attempt to replace a light bulb
when the grill is in use. Serious burns will result.
WARNING:
Never touch halogen bulbs with your
bare fingers. Use a tissue or a small piece of paper
to handle bulbs. Oils from your hands will damage
halogen bulbs.
Light Removal
1.
Open the grill hood and locate the glass light
covers at the back of the grill.
2.
Using a small screwdriver,
cover away from the housing. Be extremely
careful prying off the light cover. You may
damage the light cover as a result.
3.
Unscrew the two screws located at the side of
the white ceramic light fixture.
4.
Pull the burnt bulb out of the socket.
Light Replacement
1.
Using a tissue or small piece of paper, carefully
push a new bulb into the socket, making sure
both wires on the bulb go into the light socket
evenly.
2.
Tighten the two screws on the side white ceramic
light fixture.
3.
Carefully replace the light cover by snapping it
in place.
www.calspas.com
gently pry the light
2009 Barbecue Grills and Carts
LTR20091038, Rev. A
Advertisement
Table of Contents
