Charge Phones And Batteries With Multicharger - Cisco Webex 840 Manual

Charge Phones and Batteries with Multicharger

Charge Phones and Batteries with Multicharger
With the 840 multichargers, you can charge up to six phones or batteries at a time. Each slot has an LED.
With the 860 multicharger, you can charge up to eight items at a time. Each desktop module has two LEDs,
one for each slot.
• Solid red LED indicates that the item is charging.
• Solid green LED indicates that the item is fully charged.
• LED that is off indicates an empty slot or an error condition.
Before you begin
For the 840 phones, ensure that you plug in the multicharger.
For the 860 phones, ensure that you properly set up the Webex Wireless Phone 860 Multicharger Base and
install up to four desktop charger modules.
Caution Use only the approved chargers and power supplies for your phone.
Procedure
Insert the phones and batteries into the slots.
Related Topics
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
136
Assemble the Webex Wireless Phone 860 Multicharger
Charge Your Phone and Battery with Desktop Dual
Base, on page 134
Charger, on page 131
Accessories