Disc Player; Track/File Selection - Panasonic CQ-RXBT490U Quick Start Manual

Disc Player

Caution
¡ A disc which has both CD-DA data and MP3/WMA data on it may not be reproduced normally.
¡Do not insert a disc when the
¡Refer to the sections of "Notes on Discs"
¡This unit does not support 8 cm {3"} discs.
¡ Do not insert foreign objects into the disc slot.
[BAND] ( 5 /h ) (Play/Pause)
toggles between pause and play with
the player source.
[DISP] (Display)
switches the information on the display.
[6] [7]
skip to the previous/next track/fi le in the player mode.
For fast reverse/fast forward, hold down either of them.
Operation Flow
When a disc is already loaded, press [SOURCE]
to select the Disc player mode.
1
Press [OPEN] to open the face plate.
2
Load a disc with the printed side facing up.
[u] (Eject)
Printed side up
3
Close the face plate manually.
Notes:
¡ The unit recognizes the disc and starts playing
automatically.
¡ The power will be turned on automatically when a
disc is loaded.
Disc Eject
1. Press [OPEN] .
2. Press [u] and take the disc out.
3. Close the face plate manually.
16
CQ-RXBT490U
indicator lights.
(a page 41) and "Notes on MP3/WMA"
[SOURCE]
[{] [}] (FOLDER)
selects a source.
skip to the previous/next folder.
4
Select a desired portion.

Track/File Selection

Press [6] / [7].
Note: To perform fast reverse/forward, hold down
either of them.
Disc Player (CD-DA disc):
Previous/next track
Disc Player (MP3/WMA disc):
Previous/next fi le
Folder Selection (MP3/WMA)
[}] (FOLDER): Next folder
[{] (FOLDER): Preceding folder
Pause
Press [BAND] ( 5 /h).
Press again to cancel.
(a page 42).
[OPEN]
opens the face plate
[5] (RANDOM)/[6] (REPEAT)
toggles on/off each play mode.
[3] (SCROLL)
scrolls the information on the display.